- Quick start
- Motion to Email alert
- Motion to SMS alert
- Motion to HTTP API call
- Barcode scan to E-mail
- Barcode scan to SMS
- Barcode scan to HTTP
Check out some of the great computer vision configurations you can setup with your cameras. This page is an overview of the most popular setups. You can read a short introduction to the solutions to get an idea of what it does. If you like the solution, you can jump to the guide that explains how to configure your system to get a similar setup.
Motion detection to SMS alert|
Learn about how you can use your connected camera to detect motions and send SMS alerts in case a motion triggers the camera. You can set up an SMS connection in Ozeki which can receive the alerts in case the connected camera detects a motion. Let's get started.
Find out how to send SMS alert from motion detection
Motion detection to HTTP request|
Your camera that is connected to Ozeki Camera Recorder can be used as a motion detector camera. The motion detector camera can send alert messages as an HTTP request in case it detects motion. The HTTP client can be created in Ozeki and it will forward the detection alert message using HTTP request.
Learn about how to make HTTP request by detecting motion
Barcode scan to E-mail|
In Ozeki Camera Recorder, you can use your camera to scan barcodes and read the data that the barcode contains. The detected and scanned barcode and the information from it can be sent by e-mail. For that, you need to set up an e-mail connection in Ozeki which will receive the data from the barcode scanner.
Find out how to detect barcodes and send e-mail alerts
Barcode scan to SMS|
The camera which is connected to Ozeki Camera Recorder can be used to scan barcodes and get the data from the barcode. Camera Recorder also provides the opportunity to send the data stored in the barcode via an SMS message. To do that, you need an SMS connection, that can be easily created in Ozeki.
Learn to send e-mail messages from barcode scanner
Barcode scan to HTTP|
Ozeki Camera Recorder ensures the ability to send the data from the scanned barcode using HTTP. For that, you just need a camera and connect it to Camera Recorder as a barcode scanner, and an HTTP client which can be also created in Ozeki quite easily as well.
Learn about how to scan barcodes to HTTP