- Quick start
- Motion to Email alert
- Motion to SMS alert
- Motion to HTTP API call
- Barcode scan to E-mail
- Barcode scan to SMS
- Barcode scan to HTTP
Check out some of the great computer vision configurations you can setup with your cameras. This page is an overview of the most popular setups. You can read a short introduction to the solutions to get an idea of what it does. If you like the solution, you can jump to the guide that explains how to configure your system to get a similar setup.
Find information about how you can use your camera as a motion detector and send alert messages in case it senses motion. By setting up en e-mail connection in Ozeki, you will be able to forward an alert e-mail message from the motion detector camera to that e-mail connection if the camera detected some motion.
Learn about how you can use your connected camera to detect motions and send SMS alerts in case a motion triggers the camera. You can set up an SMS connection in Ozeki which can receive the alerts in case the connected camera detects a motion. Let's get started.
Your camera that is connected to Ozeki Camera Recorder can be used as a motion detector camera. The motion detector camera can send alert messages as an HTTP request in case it detects motion. The HTTP client can be created in Ozeki and it will forward the detection alert message using HTTP request.
In Ozeki Camera Recorder, you can use your camera to scan barcodes and read the data that the barcode contains. The detected and scanned barcode and the information from it can be sent by e-mail. For that, you need to set up an e-mail connection in Ozeki which will receive the data from the barcode scanner.
The camera which is connected to Ozeki Camera Recorder can be used to scan barcodes and get the data from the barcode. Camera Recorder also provides the opportunity to send the data stored in the barcode via an SMS message. To do that, you need an SMS connection, that can be easily created in Ozeki.